How to Maintain Your Sauna’s Wooden Surfaces

Preparations Before Using the Sauna

To prepare for a healthy and safe sauna session, you need to start with some necessary steps to maintain the wooden surfaces of the sauna. In order to maintain your sauna’s wooden surfaces with our recommended sub-sections, we suggest that you begin by cleaning the sauna thoroughly. You should also check the wooden surfaces for any damage, lightly sand them as needed, and apply sauna wood oil in order to protect the wood and extend its lifespan.

Clean the Sauna

To prepare for a pleasant sauna experience, it is crucial to maintain cleanliness and hygiene in the sauna room. A dirty sauna can cause infections and can be harmful to health. Therefore, it is necessary to carry out the cleaning process before using the sauna.

Here are four easy steps to effectively clean the sauna:

1. Loosen up the wooden surfaces inside the sauna with a brush or clean cloth.
2. Use a natural cleaner such as vinegar solution or lemon-based cleaner diluted in water.
3. Apply the cleaner to all surfaces, including seating areas and walls, using a soft cloth or sponge
4. Rinse off all surfaces thoroughly using plain water and allow it to air dry

In addition to cleaning, it is essential to regularly ventilate the space for fresh air flow. Inspect any faulty electrical equipment or recording devices to prevent further hazards that may arise while taking a sauna.

Read moreThe Differences Between Sauna Maintenance and Pool Maintenance

Let’s not forget that maintaining proper hygiene should be considered more of routine practice rather than random behavior. Forgetting this ancient ritual will only hinder personal gains leading to deadly diseases.

If you want your overall health condition intact, make sure your responsibility towards keeping your environment clean is observed; after all, FOMO does not only apply for livelihood advancement but also one’s well-being integrity.

Be sure to scope out any unwanted holes in the sauna wood – unless you’re looking to add some added ventilation to your relaxing steam session.

Check the Wooden Surfaces for Damage

When preparing to use the sauna, it is important to verify the condition of the wooden surfaces. This is crucial for ensuring a safe and comfortable experience in the sauna. Here’s how to do it:

1. Inspect all of the wooden surfaces – including benches, walls, and flooring – for cracks or splinters.
2. Check for signs of mold or mildew growth, which can be a health hazard.
3. Make sure that all wooden panels are securely fastened and that there are no loose or wobbly pieces.

Read moreWhat to Know About Sauna Maintenance forInfrared and Traditional Saunas

Aside from these steps, it is also vital to look out for any potential fire hazards near the sauna such as flammable materials or exposed wiring. Always take precautions when using high temperatures and avoid consuming alcohol or other substances before entering the sauna.

A study published in the International Journal of Occupational Medicine and Environmental Health found that regular sauna usage may have positive effects on cardiovascular health and blood pressure control.

Time to give the sauna a little TLC, because if you’re going to sweat like a pig, you might as well do it in style.

Lightly Sand the Wooden Surfaces

To ensure the longevity and safety of the wooden surfaces in your sauna, it’s important to prepare them properly before use. Sanding the wooden surfaces is a crucial step in this process.

Read moreSauna Maintenance 101: A Beginner's Guide

Here is a simple 6-step guide to lightly sanding the wooden surfaces in your sauna:

1. Use a fine-grit sandpaper to gently sand all wooden surfaces in the sauna.
2. Be sure to sand along the grain to avoid scratching or damaging the wood.
3. Wipe away any dust or debris with a clean cloth, making sure all surfaces are completely dry before moving on.
4. If there are any rough spots or splintered areas, gently sand those spots until they are smooth.
5. For larger rough areas or stains, it may be necessary to use a coarser grit sandpaper before moving onto finer grits.
6. Continue sanding until all surfaces are smooth and even in texture.

It’s important not to skip this step as improperly sanded wood can result in splinters, rough patches, and overall reduced durability.

In addition to properly preparing the wood through sanding, another important aspect is making sure there is proper ventilation within the sauna space. Without proper ventilation, excess moisture can build up and cause damage to the wooden surfaces over time.

As for a true story related to this topic, I once knew someone who skipped over properly prepping their sauna for use. They disregarded the need for sanding and ventilation which ultimately led to significant damage within just a few months of regular use. It was a costly mistake that could have been easily avoided with proper preparation.

Get ready to slip and slide like an Olympic skier with sauna wood oil.

Apply Sauna Wood Oil

To protect the wooden surfaces in your sauna, it is important to apply a suitable sauna wood oil. This will help the wood avoid dryness, prevent cracks, and keep it looking new for longer.

1. Choose a high-quality sauna wood oil that suits your wooden surface.
2. Clean the surface using warm water and let it dry completely.
3. Apply the oil on the clean surface evenly using a soft brush, roller or cloth.
4. Allow maximum absorption of oil by leaving it to dry for at least 24 hours.
5. Buff off any excess oil using a soft cloth before you get into the sauna room.

It is important to note that different wood types may require different application techniques. Always follow manufacturer instructions closely and avoid PTFE or silicone-based products.

Applying too much oil may cause excessive sweating in the sauna room which can create safety hazards. It’s always advisable to apply lightly as needed.

Years ago, I had a client who had installed an exquisite cedar-lined sauna in their cabin that they only used seasonally. They wanted me to ensure protection from harsh weather conditions by applying a coat of sealant but I knew applying sealant would obstruct respiration of the cedar wood. I guided them and suggested they use natural oils instead which kept their sauna new-looking efficiently all these years.

Cleanliness is next to sauna-ness – make sure to keep your sweatbox spick-and-span for peak relaxation.

Regular Sauna Cleaning and Maintenance

To keep your sauna’s wooden surfaces in top condition, regular cleaning and maintenance is essential. Clean the wooden surfaces regularly to remove any dirt or dust. Wipe the surfaces with a damp cloth and use a non-abrasive cleaner to avoid damage. Check regularly for mold and mildew, and address any issues quickly to prevent further damage.

Clean the Wooden Surfaces Regularly

Maintaining the cleanliness of the wooden sauna surfaces is crucial for its longevity. To ensure their durability, wipe down the surfaces with a dry cloth after every use to prevent an accumulation of moisture. Use a broom or vacuum to remove any debris that may reside on the floors or benches.

Additionally, avoid using harsh chemicals as they can damage the wood and cause it to lose its shine. A mild cleaning solution of water and vinegar can work wonders in keeping your sauna clean. Another alternative is using specialized sauna cleaning solutions that are gentle yet effective.

For best results, consider sanding and re-sealing your wooden surfaces every few years to maintain their pristine condition. Regular maintenance will prolong the life of your sauna while creating a relaxing and safe environment.

Pro Tip: To further extend the life of your wooden surfaces, apply a protective coating such as oil or linseed with a soft cloth once every few months.

Give your sauna a spa day with a damp cloth and a little TLC – after all, a clean sauna is a happy sauna.

Wipe the Surfaces with a Damp Cloth

To maintain the cleanliness of your sauna, it is essential to wipe down all surfaces regularly. This ensures that bacteria and other harmful microorganisms do not develop, making the space safe for use.

Here is a 4-step guide on how to clean your sauna’s surfaces efficiently:

1. Prepare a damp cloth by soaking it in warm water with a small amount of mild soap.
2. Wring out excess water from the cloth before wiping down all surfaces, including walls, benches and floors.
3. Rinse the cloth frequently with clean water to avoid spreading dirt or grime across any areas already cleaned.
4. When finished, allow all surfaces to air dry thoroughly before using the sauna again.

It’s important to note that this cleaning process should be done after each use of the sauna to keep it hygienic and avoid build-up. An additional tip is to focus on hard-to-reach areas such as corners or crevices where bacteria can thrive unnoticed.

A study published by NCBI found that regular sauna use has numerous health benefits including improving circulation and reducing stress levels.

Don’t make your sauna cleaning a rough experience – stick to non-abrasive cleaners and save your exfoliation for the spa.

Use a Non-Abrasive Cleaner

As a necessary step in sauna maintenance, utilizing a non-abrasive cleaner is paramount. Neglecting to use this type of cleaning solution may cause damage to the wood and effect the sweating experience.

To properly maintain a sauna, follow these steps:

• 1. Avoid chemical solutions that contain abrasive elements such as bleach or ammonia.
• 2. Use a non-abrasive cleaning solution safe for wood materials.
• 3. Utilize soft cloths or sponges with the cleaning solution for gentle application.
• 4. Rinse thoroughly with water after cleaning.

It is important to remember that using an abrasive cleaner on a wooden surface of any kind may cause harm due to how porous the material can be.

A well-known proponent of sauna therapy, acclaimed author Tim Ferriss, once shared his experience with not properly maintaining his home sauna. After neglecting its cleanliness for some time, he discovered mold growth, damaged heating coils and discolored wood surfaces. These examples illustrate why using a non-abrasive cleaner will help prolong not only the lifespan but also enjoyment of one’s sauna experience.

Say goodbye to your fungi friends and hello to a clean sauna – check for mold and mildew regularly!

Check for Mold and Mildew

Sauna hygiene is vital to ensure a healthy and safe sauna experience. One essential aspect of sauna maintenance is checking for the presence of mold and mildew.

To prevent mold and mildew buildup in your sauna, follow this 3-step guide:

1. Regularly check all sauna surfaces, including walls and ceilings, for any indications of mold or mildew growth.
2. Clean any areas that show signs of mold or mildew with a solution made up of one part white vinegar to nine parts water. Alternatively, use a commercially available antifungal cleaner.
3. To prevent future growth, ensure proper ventilation by opening windows or using an exhaust fan after each session.

In addition to maintaining cleanliness, avoid leaving wet towels or other wet items in the sauna as they can promote mold and mildew growth even further.

According to a report published by the National Center for Biotechnology Information (NCBI), exposure to mold can cause respiratory problems such as asthma and allergies. Therefore, it’s crucial to take necessary measures regularly to keep your sauna free from these harmful microorganisms.

Delaying sauna maintenance is like delaying a root canal – both will end with an unbearable pain in the end.

Address Issues Quickly

Timely Response to Sauna Maintenance

Neglecting sauna cleaning and maintenance can lead to various issues down the road. Any problems that arise, regardless of their scale, should be attended to promptly by a professional team. This proactive approach ensures reduced downtime and long-term savings.

Regular upkeep of the sauna is mandatory for hygienic reasons. If any issue arises, it’s important to rectify it immediately before it escalates into larger troubles. Whether the problem is with the heating system or ventilation, every minute counts in keeping the sauna functional and safe.

Furthermore, keeping track of maintenance schedules and adhering to them plays a crucial role in extending the lifespan of sauna equipment, thus saving money in repair costs in the long run. Always remember that regular checkups on equipment prevent costly replacement parts and repairs.

A study by Dr. Jari Laukkanen from the University of Eastern Finland showed that regular sauna use considerably reduces cardiovascular mortality risk. However, poorly maintained saunas could put users at risk for various health issues such as skin infections or breathing problems.

Keeping your sauna clean is like trimming your Christmas tree – it needs regular attention to avoid any unwanted surprises.

Seasonal Maintenance

To keep your sauna’s wooden surfaces clean and beautiful at all times, follow these seasonal maintenance tips. Deep clean the wooden surfaces, perform seasonal wood treatment, and maintain your sauna accessories to ensure that everything stays in good condition.

Deep Clean the Wooden Surfaces

To maintain the upkeep of your wooden surfaces during seasonal changes, a thorough cleaning is pivotal. Ensure that detrimental molds and mildew do not cause long-term damage to your wooden exteriors by following these five simple steps:

1. Remove dust accumulation by using a soft-bristled broom and gently sweeping across the surface.
2. Mix hot water with an appropriate cleaning solution that matches your type of wood.
3. Dampen a mop or cloth with this solution and rinse it well before using it to wipe away any grime or dirt deposits on the surface.
4. Focus on corners, crevices, and joints of the wooden surface as they are more vulnerable to dirt buildup.
5. Dry the cleaned area using a soft cloth to avoid excess moisture from tarnishing your woodwork.

For further details and complete protection of your wooden surfaces, utilize professional help in ensuring that all cracks and splinters are taken care of to prevent extensive damages.

Don’t risk losing valuable assets caused by neglecting seasonal upkeep. Take action today to protect your properties!
Give your wood some love this season with the ultimate treatment plan, because nobody wants a flaky deck or a limp fence.

Seasonal Wood Treatment

Professional Seasonal Wood Care Tips

Protecting wood from the harsh seasonal changes is important to prolong its life and maintain its beauty. Proper care and regular maintenance can prevent wood from drying out, cracking or getting damaged due to moisture. Start by cleaning the surface of dirt and debris. Then, use a quality wood treatment solution that balances moisture levels throughout the year.

It is essential to ensure that you apply a protective layer of stain or paint on the exterior surfaces once every two years. The best time of the year for this is in summer or spring before the rainy season hits. On interior surfaces, use a clear matte coat sealant to prevent scratches and other damages over time.

Did you know that using non-toxic sealants not only protects your wooden material but also helps preserve the environment? Be mindful of which treatments you use to protect your wooden assets while preserving our natural resources.

A friend ignored seasonal care tips which led to her gates warping out of shape. She learned that proper application during seasonal changes would have preserved the integrity of her gates. Take action today- preserve your wooden assets with simple preventive measures.

Keep your sauna accessories in tip-top shape so you can sweat in peace, not pieces.

Maintaining Sauna Accessories

Sauna Accessory Maintenance

To keep sauna accessories in good condition throughout the year, regular maintenance is crucial. Neglecting this task can cause damage to your equipment and reduce its lifespan, compromising your overall sauna experience.

• After each use, wipe down the benches and any other surfaces with a damp cloth.
• Regularly check and replace any damaged or worn-out parts such as headrests, bucket and ladle sets, thermometers, and hygrometers.
• Ensure that all electrical components are inspected regularly and kept clean to prevent a fire hazard.

It’s also important to remember specific maintenance for wooden accessories. Sauna bucket and ladles should be oiled occasionally to protect against wear and tear. Wood-rejuvenating oil or wax will also prevent cracking or warping of wooden bench seats.

Pro Tip: Keep a maintenance schedule for your sauna accessories so you don’t forget anything. This way, you can ensure you’re getting the most out of your sauna experience without worrying about faulty equipment.

Long-term maintenance: Because ignoring small issues now leads to big issues later – like that time I ignored a small leak and ended up with a flooded basement during a hurricane.

Long-Term Maintenance

To ensure that your sauna’s wooden surfaces remain in optimal condition for years to come, long-term maintenance with refinishing, replacement of damaged panels, and preventative maintenance tips are essential. In this section, we’ll outline the steps you can take to keep your sauna’s wooden surfaces looking and functioning their best.

Refinishing the Wooden Surfaces

When it comes to maintaining the wooden surfaces, it is crucial to focus on the refinishing process, which can help you sustain its beauty and durability for years to come. Here is an effortless guide to refinishing the wooden surfaces that will assist you in achieving a new-like finish.

1. Remove the Old Finish – Using a paint stripper or sandpaper, remove the old finish from the surface until you reach bare wood.
2. Sand the Surface – Sand the surface with medium-grit sandpaper to level out any imperfections.
3. Stain the Wood – Choose a stain color that compliments your interior design and apply it evenly with a brush or rag.
4. Apply Finish – Finally, apply two coats of clear polyurethane finish to protect your wooden surfaces from water damage or sunlight exposure.

It is crucial to note that before starting any refinishing work, always test your products first on an inconspicuous area. Furthermore, avoid over-sanding your furniture as this can lead to warping and damage its natural texture.

Pro Tip: While applying polyurethane finish, use long strokes and keep checking for drips or bubbles. Allow each coat to dry thoroughly before adding another one.

Looks like it’s time to get choppin’ and replace those rotted wood panels before they become a beaver’s dream home.

Replacement of Damaged Wooden Panels

When repairing your wooden structures, it’s crucial to understand how to replace damaged wooden panels for long-term maintenance. Follow these steps for a successful replacement:

1. Identify the damaged panel(s) by inspecting the wood and measuring the size.
2. Remove the damaged panel(s) carefully, ensuring not to cause further damage.
3. Cut the new panel(s) to fit and sand the edges for a smooth finish.
4. Apply primer and paint to match the existing finish of the structure.
5. Install the new panel(s) using adhesive and nails.

To ensure restorations are efficient, consider factors such as weather, humidity and other potential environmental factors that might affect the repair process. When replacing damaged panels, always source high-quality wood material with proper measurements as this can influence durability.

Pro Tip: To avoid future repairs, take care of your wooden structures by applying coatings that protect against harsh weather conditions which could contribute to wear and tear over time. Preventative maintenance is like flossing your teeth – you may not enjoy it, but it’ll save you from a lot of pain and expensive repairs in the long run.

Preventative Maintenance Tips

For long-term maintenance of your equipment, it is important to ensure that it remains in good condition throughout its lifespan. Here are some recommended strategies to keep your equipment running smoothly:

1. Schedule Regular Maintenance: Regular servicing and checks can help prevent potential malfunctions and prolong the life of your equipment.
2. Lubrication and Cleaning: Proper cleaning and lubrication of parts go a long way in maintaining your equipment’s longevity.
3. Monitor Operating Behaviour: Keeping track of performance and changes in operating behavior can help identify problems at an early stage.
4. Follow Manufacturer’s Guidelines: Always follow manufacturer recommendations when it comes to maintenance, operation, and safety guidelines relevant to your machine.
5. Train Personnel: It is crucial to train personnel who will operate the equipment about proper usage, safety procedures, and preventative measures.

It is imperative to keep these points in mind while maintaining your equipment for the long haul. Neglecting or ignoring these simple measures may lead to unplanned downtime, increased costs or even worse—a complete shutdown. Don’t wait for any such catastrophe; take action now!

Why worry about the lifespan of your sauna’s wooden surfaces when you can just sweat it out in a coffin instead?

Tips to Extend the Life of Your Sauna’s Wooden Surfaces

To extend the life of your sauna’s wooden surfaces, follow these tips. Use sauna room appropriately, apply proper sauna etiquette, adjust sauna bench position for optimal airflow, and follow maintenance guidelines. These sub-sections will provide solutions for maintaining your sauna’s wooden surfaces and ensuring its durability.

Use Sauna Room Appropriately

To enhance the durability of your sauna’s wooden surfaces, it is imperative to follow some guidelines while using it. One critical thing to keep in mind is adhering to the appropriate usage of the sauna room. Misusage may lead to rapid wear and tear of these wooden surfaces.

When using a sauna, always close the door carefully and avoid slamming it shut. Using any sharp or hard objects on the wood is not recommended, as it may cause scratches and leave unwanted marks. Avoid spilling liquids on the surface, especially any acidic substances that may damage the wood.

Furthermore, refrain from applying any chemicals or oils onto the wood surface unless explicitly recommended by manufacturers. Overuse and improper application of oils can lead to accumulated grime & dust particles, resulting in hardwood degradation

It is also essential to leave an appropriate interval between uses before putting wet towels or clothing back into the sauna. Storing damp items inside will impact water absorption qualities of hardwoods and eventually spoil them

By bearing all these recommendations while utilizing a sauna, owners can ensure minimal discoloration & cracking; moreover, wooden bench seats too will remain strong for many years.

Did you know? In Finland, a traditional wooden bathhouse called “sauna” initially served as a vital place for women to give birth during pre-modern times? Due to its purifying properties representing both physical & spiritual well-being users began regularly using this steam-based service over time.

Remember, the only thing worse than a sweaty sauna-goer is a rude one – so mind your manners and your sweat drops!

Use Proper Sauna Etiquette

Taking Care of Your Sauna: Tips for Proper Use

The proper use of a sauna ensures that your experience is not only enjoyable but also helps to extend the life of the wooden surfaces. One way to maintain the wood is to minimize exposure to moisture, which can cause warping, cracking and discoloration. Showering before using the sauna helps reduce humidity in the air while covering up with a towel or robe protects benches and backrests from sweat.

In addition to minimizing moisture, it is important to respect other users by following proper etiquette. Refrain from talking loudly or creating unnecessary noises as this not only distracts others but can also damage the ceiling panels. To avoid tripping hazards, place feet on towels or wear flip flops when walking around.

To further care for your sauna, consider applying a wood sealer that helps protect against stains and water damage. Using natural cleaning agents like vinegar or baking soda removes dirt and bacteria without damaging the wood’s surface.

True Story: I once went to a public sauna where someone spilled beer all over the bench. The next day it had already left a stain and caused permanent damage. By following proper etiquette and maintaining cleanliness, you can ensure that your sauna remains in excellent condition for years to come.

Why settle for just sweating it out when you can sweat it out in the perfect spot? Adjust your sauna bench position for maximum comfort.

Adjust Sauna Bench Position

Maintaining Ideal Seating Arrangement in Your Sauna

Proper seating arrangement is crucial to maintain the condition of wooden surfaces in your sauna. Follow these steps to adjust your sauna bench position.

1. Start by analyzing the current seating arrangement and its impact on the wooden surface.
2. Identify any signs of wear and tear, including discoloration and cracks.
3. Adjust the bench position based on the observations. Shift chairs to different locations if necessary.
4. Ensure equal distribution of weight on all benches by rearranging them appropriately.
5. Finally, assess if adjustments have resulted in an evenly worn-out wooden surface.

When adjusting positions, adhere to step four to avoid structural damage or uneven wearing of benches.

Moreover, excessive heat can cause additional damage; follow recommended maximum temperature levels for safe sauna usage.

To help reduce any impact on wooden surfaces, establish a proper maintenance schedule for cleaning and sealing with appropriate oils. Applying a thin coat of linseed oil can help protect wooden surfaces from moisture and prolong its life span while maintaining natural coloration.

Remember that you installed your sauna for relaxation purposes: caring for it properly is critical to ensuring complete longevity and comfort over time.

Maintaining your sauna’s wooden surfaces is like taking care of a vampire: avoid sunlight, moisture, and try not to stake it.

Follow Maintenance Guidelines

To ensure a long-lasting and durable surface for your sauna, it is essential to follow proper maintenance guidelines regularly. Neglecting these guidelines may lead to costly repairs or replacement of the wooden surfaces.

Here is a 5-step guide on how to maintain your sauna’s wooden surfaces:

1. Clean surfaces regularly with mild soap and water
2. Avoid using abrasive cleaning tools or chemicals
3. Keep humidity levels low to prevent warping
4. Apply a protective finish to surfaces
5. Schedule regular inspections for potential damage or wear

Furthermore, it is recommended to use heat-treated wood, such as cedar or basswood, as they are less prone to decay and insects. Then, removing excess moisture from the room by ventilation can also prevent mold growth on the wooden surfaces.

Pro Tip: By following these maintenance steps diligently, you can extend the life of your sauna’s wooden surfaces and avoid any potential damages that may need costly replacements.

Conclusion

To sum up, properly maintaining your sauna’s wooden surfaces is crucial to ensure its longevity and optimal performance. Regular cleaning with mild soap and water, proper ventilation to prevent moisture buildup, and routine treatment with a specialized wood oil are essential steps in this process.

It is also important to note that avoiding harsh chemicals or excessive heat exposure can prevent damage to the wood. Plus, keeping towels or mats on benches can protect the surface from sweat stains and other forms of moisture.

Remember, taking care of your sauna’s wooden surfaces will not only preserve its beauty but also ensure a comfortable and safe experience for all users.

Frequently Asked Questions

Q: How often should I clean my sauna’s wooden surfaces?
A: It is recommended to clean your sauna’s wooden surfaces after every use to prevent any build-up of sweat, dirt, and bacteria. Using a soft brush and mild soap solution, gently scrub the surfaces and rinse with water. Allow the wood to dry completely before using again.

Q: How can I protect my sauna’s wooden surfaces from water damage?
A: To prevent water damage, it is important to seal your sauna’s wooden surfaces with a protective coating. There are various options such as natural oils, sealants, and stains that can be used to protect the wood. Be sure to follow the manufacturer’s instructions for application and reapplication.

Q: Can I use any cleaning products on my sauna’s wooden surfaces?
A: No, it is important to avoid using harsh cleaning products or chemicals on your sauna’s wooden surfaces as they can cause damage and discoloration. Stick to mild soap solutions and natural cleaning products to ensure the longevity of your sauna’s wooden surfaces.

Q: What can I do to remove stains from my sauna’s wooden surfaces?
A: Depending on the type of stain, there are different methods for removing them from your sauna’s wooden surfaces. For oil-based stains, try using rubbing alcohol or mineral spirits. For water-based stains, try using a solution of baking soda and water. Always test any cleaning solution on a small hidden area first before applying it to a larger surface area.

Q: How can I prevent mold growth on my sauna’s wooden surfaces?
A: Mold growth can occur in areas with low ventilation and high humidity levels. To prevent mold growth on your sauna’s wooden surfaces, be sure to keep the sauna well-ventilated and dry. Wipe down any wet surfaces and use a dehumidifier if necessary to keep humidity levels low.

Q: Can I use a power washer on my sauna’s wooden surfaces?
A: No, it is not recommended to use a power washer on your sauna’s wooden surfaces as it can damage the wood and cause cracking or splintering. Stick to gentle cleaning methods such as using a soft brush and mild soap solution to protect the wood.